The daily maintenance of Flaskless molding machine should focus on the following aspects, combining general mechanical maintenance principles with the characteristics of forming equipment:
1. Basic Maintenance Points
Regular Inspection: Check the tightness of bolts and transmission components daily to prevent equipment deviation or abnormal vibration caused by loosening.
Cleaning Management: Timely remove residual materials and dust to avoid accumulation affecting the precision of moving parts or causing electrical failures.
Lubrication Maintenance: Use designated lubricants (such as gear oil, bearing grease) in accordance with specifications, replace and clean the oil circuit regularly, and prevent impurities from wearing key components.
2. Core System Maintenance
Drive System: Observe whether the operation is stable; abnormal noise or shaking may indicate gear wear or foreign object jamming.
Pneumatic/Hydraulic System: Check the tightness of pipelines to prevent air leakage or insufficient oil pressure; clean the water separator and air filter regularly to ensure dry air supply.
Electrical Control: Monitor the aging of circuits to avoid action errors caused by short circuits or signal interference.
3. Operating Specifications and Records
Safe Operation: Strictly implement the system of assigning specific personnel to specific machines; it is forbidden to start the machine with materials or adjust parameters in violation of regulations.
Maintenance Records: Record inspection, lubrication and fault handling details in detail to facilitate tracking of equipment status and formulation of preventive maintenance plans.
4. Special Precautions
Moldless Forming Characteristics: Due to the absence of mold constraints, extra attention should be paid to the stability of forming pressure and speed, and sensors and control systems should be calibrated regularly.
Emergency Handling: Stop the machine immediately when abnormalities are found to avoid further damage caused by forced operation.
The above measures can significantly improve equipment service life and forming quality. It is recommended to formulate a personalized maintenance cycle in combination with the equipment manual.
Quanzhou Juneng Machinery Co.,Ltd. is a subsidiary of Shengda Machinery Co.,Ltd. specializing in casting equipment.A high-tech R&D enterprise that has long been engaged in the development and production of casting equipment, automatic molding machines,and casting assembly lines.
If you need a Flaskless molding machine, you can contact us through the following contact information:
Sales Manager : zoe
E-mail : zoe@junengmachine.com
Telephone : +86 13030998585
Post time: Oct-17-2025